This version of Internet Explorer is no longer supported.

To get the best possible experience using our website we recommend that you upgrade to a newer version or other web browser. A list of the most popular web browsers can be found here.

z

Artificial Disc

About the Artificial Disc | An Alternative to Fusion Surgery | Benefits | Lumbar vs. Cervical Artificial Disc | Other issues to consider

About the Artificial Disccharite

Perhaps the most anticipated advance in spine surgery over the past 20 years was the arrival of the artificial disc. The first artificial disc in the United States received formal approval by the Food and Drug Administration (FDA) for widespread use in the United States on October 26, 2004. While this technology is somewhat new to the U.S., artificial discs have been in use in Europe for more than 15 years.

It is important to remember that this technology is still evolving with new implants continually in development. Your spine surgeon is the best resource to discuss if it is appropriate for you, and what model of artificial disc is best suited for your case.

For example, there are about three models of artificial discs approved by the FDA for use in the United States — Charite, Prestige and ProDisc — and that number is expected to grow as new models emerge on the scene and surgeons become trained in their use. Each disc is designed for use either in the low back (lumbar area) or neck (cervical area).

In addition, other artificial disc models are available on a limited basis through “clinical trials” where a patient agrees to be part of clinical study designed to measure the success of a new disc model, which will be part of an FDA study. Patients who participate in a clinical trial can gain access to the most current technology, even though it has yet to gain FDA approval for use in the U.S.

[Top]

An Alternative to Fusion Surgery

The artificial disc concept is intended to be an alternative for spinal fusion surgery. Each year in the U.S., more than 200,000 spinal fusion surgeries are performed to relieve excruciating pain caused by damaged discs in the low back and neck areas.

During a fusion procedure, the damaged disc is typically replaced with bone from a patient’s hip or from a bone bank. Fusion surgery causes two vertebrae to become locked in place, putting additional stress on discs above and below the fusion site, which restricts movement and can lead to further disc herniation with the discs above and below the degenerated disc. An artificial disc replacement is intended to duplicate the function level of a normal, healthy disc and retain motion in the spine.

charite

When a natural disc herniates or becomes badly degenerated, it loses its shock-absorbing ability, which can narrow the space between vertebrae. In fusion surgery, the damaged disc isn’t repaired but rather is removed and replaced with bone that restores the space between the vertebrae. However, this bone locks the vertebrae into place, which can then damage other discs above and below.

A common aspect of all artificial discs is that they are designed to retain the natural movement in the spine by duplicating the rotational function of the discs Mother Nature gave us at birth. Most artificial disc designs have plates that attach to the vertebrae and a rotational component that fits between these fixation plates. These components are typically designed to withstand stress and rotational forces over long periods of time. Still, like any manmade material, they can be affected by wear and tear.

[Top]

Benefits

Some of the main benefits of the artificial disc parallel that of knee replacement and hip replacement. This can include the following benefits:

  • An artificial disc in the neck or back, in principle, is designed to retain motion in that particular segment of the spine.
  • It prevents degeneration of disc levels above and below the affected disc
  • There is no bone graft required
  • There can be a quicker recovery and return to work or activity
  • It can be a less invasive and less painful surgery than a fusion
  • There can be less blood loss during surgery

[Top]

Lumbar vs. Cervical Artificial Discs

  xray image xray image
 

PRESTIGE® Cervical Disc by Medtronic, www.prestigedisc.com

Because of the weight of the body and the rotational stress that the trunk places on discs in the low back (lumbar) area, more stress is placed on artificial discs in the lumbar area than in the neck (cervical) area, which only supports the weight of the head.

A second issue relates to the ease of the artificial disc surgery and any necessary revision surgery to replace a worn out artificial disc. Because the surgeon must access the front of the spine, an incision is made in the abdomen for lumbar discs and in the front of the neck for cervical discs. Generally speaking, many spine surgeons believe access to the cervical discs can be easier than the lumbar discs.

[Top]

Other issues to consider

prodisc c prodisc l  

Prodisc-C © by Synthes, www.snythes.com

Prodisc-L © by Synthes, www.synthes.com

 

When treating knee and hip replacement patients, orthopedic surgeons try to postpone the implantation of an artificial joint until a patient is at least 50 years old so that they do not outlive their artificial joint, which typically lasts anywhere from 15 to 20 years. Revision surgery, which may be necessary to replace a worn-out artificial joint, can be complex.

This is also a concern with the artificial disc. Unlike knee and hip replacement patients who are typically in their 50s or 60s, many patients can benefit from artificial disc technology at a much younger age — in their 20s or 30s. Therefore, the implantation of an artificial disc in younger patients can raise a surgeon’s concern about the potential life span of the artificial disc in the spine and the need for revision surgery to replace a worn-out artificial disc, which can be complex.

In summary, some spine surgeons may be cautious about the use of artificial discs for the following reasons:

  • Wear and tear on artificial joints cant require revision surgery in 10 to 20 years that can be extremely complex.
  • Most artificial disc implants only address rotational forces, not the up and down shock absorbing function of the natural disc.
  • Overweight people can wear out a lumbar disc prematurely.
  • New artificial discs are continually in development, however FDA approval is a lengthy process.
  • There are not many 20-year-long studies that show the long-term effects of wear and tear on artificial disc implants.

Generally, the technology is very promising. Your spine surgeon can provide information if your problem can be addressed with this technology.

Due to the fact that the surgeon must access the front of the spine, an incision is made in the abdomen for lumbar discs and in the front of the neck for cervical discs. Typically, access to the cervical discs can be easier than the lumbar discs.

[Top]

Developing Centers of Excellence for Better Healthcare

Educational illustrations and content Copyright © 2016 Prizm Development, Inc.
Web design & Copyright 2016 © Prizm Development, Inc. All rights reserved.
PrizmDevelopment.com

Patient Success Stories
event one
event one
Bob

Surgery repairs damaged disc and returns outdoorsman to activity.

event one
event one

Paramedic gets back to life with Kenai Spine.

event one
event one

Healthcare CEO back on the job after pain relieving spine surgery.

event one
event one

School administrator recovers from back pain without surgery.

event one
event one

Dog sled champion back on the trails after non-surgical treatment.

Educational Resources
Medical Animations

Watch various medical animations to learn about conditions and treatment options.

recent post

View medical illustrations that help you understand pain symptoms.

recent post

Learn about special exercises and stretches that can relieve pain and help rehab muscles and joints.

recent post

Learn about minimally invasive surgery techniques that enable patients to go home the same day.

Where to find us

Kenai Spine is proud to announce that we have moved into our new spine center at 240 Hospital Place, Suite 103, in Soldotna, Alaska. Over the past few years, Kenai Spine has become a referral center for those with back and neck pain with patients coming from as far away as Anchorage, Fairbanks and Seward. Click here for driving directions.

Physician Bios
Medical Animations

S. Craig Humphreys, MD
Fellowship-trained spine surgeon
Board Certified Orthopedic Surgeon

recent post

Mark Simonson, MD
Board Certified in PM&R
Board Certified in Pain Medicine